OOR ONS

deurbraak

Nuwe geluk

INLEIDING

Fuqing New Fortune Machinery Co, Ltd is 'n professionele vervaardiger van glas diep verwerkingstoerusting wat , wat die produksprestasie voortdurend opgradeer, en voldoen aan die vervaardigers se behoeftes vir hoë doeltreffendheid, energiebesparing, stabiliteit, veiligheid, beskerming van die omgewing en die aanpassing van glaswasapparaat.

  • -
    Gestig in 2003
  • -
    16 jaar ondervinding
  • -+
    ontwikkeling en innovasie
  • -%
    Verbeter die produkprestasie

Nuwe geluk

Fortune

  • Gebuigde glaswasmasjien (kwasweergawe)

    Gebuigde glaswasmasjien (kwasweergawe)

    Belangrikste tegniese spesifikasies Glasgrootte: Max 1800 x 2000 mm Min 1000 x 500 mm Dikte: 1.6-3.2mm Werkhoogte: 1000 ± 50mm (afgrond) Glasvloei: kruisvoer / vleuel onder Diepte van die buiging: Max 250mm, Min 50mm kruis kromming: 0-50mm Boorsnelheid: 3-10m / min verstelbaar Droogspoed: 8m / min Hooffunksies Verwyder stof, handskoenafdruk, drukmerk, ens., droog deeglik om glas gereed te kry vir laminering. Hoofkenmerke ● Twee parallelle Fenner V-bande word gebruik vir vervoer. ● Sensors word by ...

  • Gebuigde glas wasmasjien vir voorruit

    Gebuigde glas wasmasjien vir voorruit

    Prosesroete Standaard BG1800 HP bespuitings: 5-groep lugmes: 5 groep Hoof tegniese spesifikasies Glas grootte: Max 1800 x 2000 mm Min 1000 x 500 mm Dikte: 1.6-3.2mm Werkhoogte: 1000 ± 50mm (afgrond) Glasvloei: kruis toevoer / vleuel na onder Diepte van die buiging: Max 250mm, Min 50mm Kruiskromming: 0-50mm Bewegingsnelheid: 3-10m / min verstelbaar Droogspoed: 8m / min Hooffunksies Verwyder stof, handskooldruk, drukmerk, ens, droog deeglik na maak glas gereed vir laminering. Belangrikste kenmerke ● ...

  • Motordeur en sontak Glaswasmasjien

    Motordeur en sontak Glaswasmasjien

    Process Route Glass input---HP washing---Brushing(4 pairs)---DI Spray---Air drying(4 pairs)---Glass output. Main Parameters Max glass size: 1300×900 mm Min glass size: 400×300mm Working width: 1300mm Glass thickness: 1.6-6mm Glass Flow: Cross feed/Wind down Main curvature: 30mm Cross curvature: 15mm Conveying speed: 3-10m/min  Drying speed: 8m/min Main Functions Remove stains, no watermark, ready for silk printing. Main Features Conveying system is driven by V belts with press roller on the t...

  • Wasmasjien vir plat glas vir motors (suurwas)

    Wasmasjien vir plat glas vir motors (suurwas)

    GCM1300mm(Before printing) Glass input---Acid Spray---Reaction---Brushing(2pair)---Air knife separation(1 pair)---Brushing(2pair)---Air knife separation(1 pair)---Brushing(3pair)---DI water spray---Air knife(5pair)---Glass Output. Main Parameters Working width: 1300mm. Glass thickness: 2-6mm. Min glass size: 450x450mm. Glass flow: SEL. Drying Speed: 3-12m/min. Main Functions Removes mildew and other stains on glass surface, no watermarks, no water on edge, ready for silkscreen or coating. Mai...

  • Argitektoniese glaswasmasjien

    Argitektoniese glaswasmasjien

    GCM2500 Standard (Before Tempering) Glass input---Pre-spray(1 pair)---brushing(3 pair)---air knife(3 pair)---DI water spray---Glass output. Main Parameters Working width: 2500mm. Glass Thickness: 3-19mm. Min Glass: 450x450mm. Drying speed: 2-8m/min. Main Function  Remove glass powder and others, no watermark and no water on glass edge, ready for  tempering. Main Features The frame is welded by SUS304 or carbon steel with top-grade auto paint. Safety covers are equipped on both sides of the eq...

ONS VENNOTE

Fortune

  • AGC
  • Schot
  • Sain
  • pilk
  • xyg
  • nozth
  • SG

NUUS

Diens eerste

  • Installasie van 'n plat glas wasmasjien Algemene instelling

    Flat Washer Installation General Instruction 1. The center line of the rubber roller in the infeed conveyor is aligned with the center line of the front equipment. The horizontal line is connected, or according to the site's unilateral connection method. 2. After confirming the placement positio...

  • Instruksie vir die aanpassing van die glasdikte

    Glass Washing Thickness Adjustment Commissioning   Take 3mm thickness glass washing for example Before Washing,   1. Find the Zero Point (Pinch rollers and lower rolllers touch each other) 2. Check the rotation direction of brush and lower rollers     When Washing See if 3...