OER ÚS

Trochbraak

Nij Fortune

YNLIEDING

Fuqing New Fortune Machinery Co., Ltd. is in profesjonele fabrikant fan glêzen djippe ferwurkingsapparatuer dy't oprjochte waard . Foar 16 jier hat New Fortune him rjochte op 'e ûntwikkeling en ynnovaasje fan glêswaskmasines, trochgeande produktprestaasjes opwurdearje, en foldwaan oan behoeften fan fabrikanten foar hege effisjinsje, enerzjybesparring, stabiliteit, feiligens, miljeubeskerming, en oanpassing fan glêswaskmateriaal.

  • -
    Oprjochte yn 2003
  • -
    16 jier ûnderfining
  • -+
    ûntwikkeling en ynnovaasje
  • -%
    Produktprestaasjes ferbetterje

Nij Fortune

Fortune

  • Bended Glass Washing Machine (Brush Version)

    Bended Glass Washing Machine (Brush Version)

    Haad technyske spesifikaasjes Glêzen grutte: Max 1800 x 2000 mm Min 1000 x 500 mm Dikte: 1.6-3.2mm Arbeidshichte: 1000 ± 50mm (off grûn) Glêsstream: Cross feed / Wing down Djipte fan 'e bocht: Max 250mm, Min 50mm Cross kromming: 0-50mm Oerdraachsnelheid: 3-10m / min ferstelber Droege snelheid: 8m / min Haadfunksjes Fuortsmite stof, gloveprintsje, drukmark, ensfh., droech goed om glês klear te krijen foar laminearjen. Haadfunksjes ● Twa parallelle Fenner V-riemen wurde brûkt foar transport. ● Sensoren wurde ynstalleare by ...

  • Bended Glass waskmasjine foar wynhâld

    Bended Glass waskmasjine foar wynhâld

    Procesrûte Standert BG1800 HP Sprays: 5 Groep Luchtmes: 5 Groep Haad technyske spesifikaasjes Glêzen grutte: Max 1800 x 2000 mm Min 1000 x 500 mm Dikte: 1.6-3.2mm Arbeidshichte: 1000 ± 50mm (off grûn) Glêsstream: Krús feed / Wing down Djipte fan 'e bocht: Max 250mm, Min 50mm Krús kromming: 0-50mm Oerdraachsnelheid: 3-10m / min ferstelber Droege snelheid: 8m / min Haadfunksjes Fuortsmite stof, handschooldruk, druk mark, ensfh., droech goed oant krije glês klear foar laminearjen. Haadfunksjes ● ...

  • Automotive Door En Sunroof Glass Wasmachine

    Automotive Door En Sunroof Glass Wasmachine

    Process Route Glass input---HP washing---Brushing(4 pairs)---DI Spray---Air drying(4 pairs)---Glass output. Main Parameters Max glass size: 1300×900 mm Min glass size: 400×300mm Working width: 1300mm Glass thickness: 1.6-6mm Glass Flow: Cross feed/Wind down Main curvature: 30mm Cross curvature: 15mm Conveying speed: 3-10m/min  Drying speed: 8m/min Main Functions Remove stains, no watermark, ready for silk printing. Main Features Conveying system is driven by V belts with press roller on the t...

  • Waskmasine foar automatyske platte glês (soere wask)

    Waskmasine foar automatyske platte glês (soere wask)

    GCM1300mm(Before printing) Glass input---Acid Spray---Reaction---Brushing(2pair)---Air knife separation(1 pair)---Brushing(2pair)---Air knife separation(1 pair)---Brushing(3pair)---DI water spray---Air knife(5pair)---Glass Output. Main Parameters Working width: 1300mm. Glass thickness: 2-6mm. Min glass size: 450x450mm. Glass flow: SEL. Drying Speed: 3-12m/min. Main Functions Removes mildew and other stains on glass surface, no watermarks, no water on edge, ready for silkscreen or coating. Mai...

  • Arsjitektoanyske glêswaskmasine

    Arsjitektoanyske glêswaskmasine

    GCM2500 Standard (Before Tempering) Glass input---Pre-spray(1 pair)---brushing(3 pair)---air knife(3 pair)---DI water spray---Glass output. Main Parameters Working width: 2500mm. Glass Thickness: 3-19mm. Min Glass: 450x450mm. Drying speed: 2-8m/min. Main Function  Remove glass powder and others, no watermark and no water on glass edge, ready for  tempering. Main Features The frame is welded by SUS304 or carbon steel with top-grade auto paint. Safety covers are equipped on both sides of the eq...

ONS PARTNERS

Fortune

  • agc
  • schot
  • hillige
  • pilk
  • xyg
  • nozth
  • sg

NIJS

Service earst

  • Platte glêzen waskmasjine ynstallaasje Algemiene ynstânsje

    Flat Washer Installation General Instruction 1. The center line of the rubber roller in the infeed conveyor is aligned with the center line of the front equipment. The horizontal line is connected, or according to the site's unilateral connection method. 2. After confirming the placement positio...

  • Ynstruksje foar oanpassing fan glêsdikte

    Glass Washing Thickness Adjustment Commissioning   Take 3mm thickness glass washing for example Before Washing,   1. Find the Zero Point (Pinch rollers and lower rolllers touch each other) 2. Check the rotation direction of brush and lower rollers     When Washing See if 3...