GAME DA MU

Budewa

Sabon Fortune

GABATARWA

Fuqing New Fortune Machines Co., Ltd. ƙwararren masana'antar sarrafa kayan gilashi ne wanda kamfanin Fujian Xinfuxing Glass Group ya kafa  a 2003. Shekaru 16, Sabon Fortune ya mai da hankali kan ci gaba da sabbin injunan wanke gilashin, ci gaba da haɓaka aikin samfuri. da kuma bukatun masu masana'antar haɗuwa don babban inganci, tanadin makamashi, kwanciyar hankali, aminci, kariya ta muhalli, da kuma keɓance kayan aikin wanke gilashin.

  • -
    Kafa a 2003
  • -
    Shekaru 16 na kwarewa
  • -+
    ci gaba da kuma bidi'a
  • -%
    Inganta kayan aiki

Sabon Fortune

Fortune

  • Injin Wanke Gilashin (Brush)

    Injin Wanke Gilashin (Brush)

    Babban bayani dalla-dalla na fasaha Girman gilashin: Max 1800 x 2000 mm Min 1000 x 500 mm ickuri: 1.6-3.2mm Tsayin aiki: 1000 ± 50mm (a ƙasa) kwararar gilashi: Gudanar da haɓaka / Rage ƙasa Zurfin lanƙwasa: Max 250mm, Min 50mm Gicciye vataukar hoto: 0-50mm Saurin isar da sako: 3-10m / min daidaitacce Saurin bushewa: 8m / min Babban ayyuka Cire ƙura, bugawar hannu, alamar matsa lamba, da sauransu, bushe sosai don shirya gilashi don laminating. Babban fasali ● Ana amfani da bel guda biyu na Fenner V don isar da sako. Are An sanya na'urori masu auna sigina a ...

  • Wanke Gilashin Wanke Glass Don Windshield

    Wanke Gilashin Wanke Glass Don Windshield

    Tsarin Hanyar daidaitaccen BG1800 HP Sprays: 5 Airungiya Air Air: 5 Mainungiya Babban ƙayyadaddun ƙayyadaddun ƙimar Gilashi: Max 1800 x 2000 mm Min 1000 x 500 mm Girma: 1.6-3.2mm Tsayin aiki: 1000 ± 50mm (a kashe ƙasa) Gudun Gilashin: Gicciye feed / Wing Down Zurfin lanƙwasa: Max 250mm, Min 50mm Gyaran saiti: 0-50mm Isar da sauri: 3-10m / min daidaitacce Saurin bushewa: 8m / min Babban Ayyukan Cire ƙura, bugawar hannu, alamar matsa lamba, da sauransu, bushe sosai zuwa shirya gilashin don laminating. Babban fasali ● ...

  • Mota ta Kaya Da Injin Wankin Gilashi

    Mota ta Kaya Da Injin Wankin Gilashi

    Process Route Glass input---HP washing---Brushing(4 pairs)---DI Spray---Air drying(4 pairs)---Glass output. Main Parameters Max glass size: 1300×900 mm Min glass size: 400×300mm Working width: 1300mm Glass thickness: 1.6-6mm Glass Flow: Cross feed/Wind down Main curvature: 30mm Cross curvature: 15mm Conveying speed: 3-10m/min  Drying speed: 8m/min Main Functions Remove stains, no watermark, ready for silk printing. Main Features Conveying system is driven by V belts with press roller on the t...

  • Gilashin Flat ɗin Gilashi

    Gilashin Flat ɗin Gilashi

    GCM1300mm(Before printing) Glass input---Acid Spray---Reaction---Brushing(2pair)---Air knife separation(1 pair)---Brushing(2pair)---Air knife separation(1 pair)---Brushing(3pair)---DI water spray---Air knife(5pair)---Glass Output. Main Parameters Working width: 1300mm. Glass thickness: 2-6mm. Min glass size: 450x450mm. Glass flow: SEL. Drying Speed: 3-12m/min. Main Functions Removes mildew and other stains on glass surface, no watermarks, no water on edge, ready for silkscreen or coating. Mai...

  • Gilashin Wanki na Gilashi

    Gilashin Wanki na Gilashi

    GCM2500 Standard (Before Tempering) Glass input---Pre-spray(1 pair)---brushing(3 pair)---air knife(3 pair)---DI water spray---Glass output. Main Parameters Working width: 2500mm. Glass Thickness: 3-19mm. Min Glass: 450x450mm. Drying speed: 2-8m/min. Main Function  Remove glass powder and others, no watermark and no water on glass edge, ready for  tempering. Main Features The frame is welded by SUS304 or carbon steel with top-grade auto paint. Safety covers are equipped on both sides of the eq...

MAGANAR MU

Fortune

  • agc
  • ilimi
  • sain
  • matashin kai
  • xyg
  • nozth
  • sg

LABARI

Sabis Na Farko

  • Flat Glass Washing Machine Installation General Umurni

    Flat Washer Installation General Instruction 1. The center line of the rubber roller in the infeed conveyor is aligned with the center line of the front equipment. The horizontal line is connected, or according to the site's unilateral connection method. 2. After confirming the placement positio...

  • Umurnin Daidaita Girman Gilashin

    Glass Washing Thickness Adjustment Commissioning   Take 3mm thickness glass washing for example Before Washing,   1. Find the Zero Point (Pinch rollers and lower rolllers touch each other) 2. Check the rotation direction of brush and lower rollers     When Washing See if 3...