TENTANG US

Pecah

New Fortune

PENGENALAN

Fuqing New Fortune Machinery Co, Ltd minangka produsen peralatan pangolahan jero profesional sing diadegake dening Fujian Xinfuxing Glass Group 16 taun, New Fortune wis fokus ing pangembangan lan inovasi mesin cuci kaca, terus-terusan ningkatake kinerja produk, lan nyukupi kebutuhan produsen kanggo efisiensi, energi, stabilitas, keamanan, perlindungan lingkungan, lan pangaturan peralatan cuci kaca.

  • -
    Diadegake ing taun 2003
  • -
    16 taun pengalaman
  • -+
    pembangunan lan inovasi
  • -%
    Nambah kinerja produk

New Fortune

Bathihe

  • Mesin Basuh Kaca Digabungake (Versi Sikat)

    Mesin Basuh Kaca Digabungake (Versi Sikat)

    Spesifikasi teknis utama Ukuran kaca: Max 1800 x 2000 mm Min 1000 x 500 mm Kekandelan: 1.6-3.2mm Dhuwur kerjane: 1000 ± 50mm (off ground) Aliran kaca: feed Cross / Wing down Depth of bend: Max 250mm, Min 50mm Cross kelengkungan: 0-50mm Kacepetan konversi: 3-10m / min kacepetan Pangatusan: 8m / min Fungsi Utama Copot bledug, print sarung tangan, tandha tekanan, lan sapiturute, garing kanthi lengkap supaya siap siap kaca. Fitur utama ● Rong sabuk Fenner V sing podo karo digunakake kanggo ngirim. ● Sensor dipasang ing ...

  • Mesin Wisuh Kaca Bensir Kanggo Windshield

    Mesin Wisuh Kaca Bensir Kanggo Windshield

    Proses Rutin BG1800 HP Proses: 5 Kelompok Udara Kelompok: 5 Grup Spesifikasi teknis utama Ukuran kaca: Max 1800 x 2000 mm Min 1000 x 500 mm Kekandelan: 1.6-3.2mm Dhuwur kerjane: 1000 ± 50mm (mati lemah) Aliran kaca: Salib feed / Wing down Depth of bend: Max 250mm, Min 50mm lengkungan: 0-50mm Kecepatan konjuk: 3-10m / min kacepetan Pangatusan: 8m / min Fungsi Utama Copot bledug, print sarung tangan, tekanan tekanan, lan sapiturute, garing kanthi lengkap njaluk kaca siap kanggo laminasi. Fitur Utama ● ...

  • Pintu Kaca lan Kaca Sunroof Mesin cuci kaca

    Pintu Kaca lan Kaca Sunroof Mesin cuci kaca

    Process Route Glass input---HP washing---Brushing(4 pairs)---DI Spray---Air drying(4 pairs)---Glass output. Main Parameters Max glass size: 1300×900 mm Min glass size: 400×300mm Working width: 1300mm Glass thickness: 1.6-6mm Glass Flow: Cross feed/Wind down Main curvature: 30mm Cross curvature: 15mm Conveying speed: 3-10m/min  Drying speed: 8m/min Main Functions Remove stains, no watermark, ready for silk printing. Main Features Conveying system is driven by V belts with press roller on the t...

  • Mesin cuci kaca Flat otomotif (Basuh Asam)

    Mesin cuci kaca Flat otomotif (Basuh Asam)

    GCM1300mm(Before printing) Glass input---Acid Spray---Reaction---Brushing(2pair)---Air knife separation(1 pair)---Brushing(2pair)---Air knife separation(1 pair)---Brushing(3pair)---DI water spray---Air knife(5pair)---Glass Output. Main Parameters Working width: 1300mm. Glass thickness: 2-6mm. Min glass size: 450x450mm. Glass flow: SEL. Drying Speed: 3-12m/min. Main Functions Removes mildew and other stains on glass surface, no watermarks, no water on edge, ready for silkscreen or coating. Mai...

  • Mesin Ngumbah Kaca Arsitektur

    Mesin Ngumbah Kaca Arsitektur

    GCM2500 Standard (Before Tempering) Glass input---Pre-spray(1 pair)---brushing(3 pair)---air knife(3 pair)---DI water spray---Glass output. Main Parameters Working width: 2500mm. Glass Thickness: 3-19mm. Min Glass: 450x450mm. Drying speed: 2-8m/min. Main Function  Remove glass powder and others, no watermark and no water on glass edge, ready for  tempering. Main Features The frame is welded by SUS304 or carbon steel with top-grade auto paint. Safety covers are equipped on both sides of the eq...

PAKAIAN KITA

Bathihe

  • ageman
  • skot
  • sain
  • pil
  • xyg
  • nozth
  • sg

BALITA

Layanan Pisanan

  • Instalasi Umum Instalasi Mesin Cuci Kaca Flat

    Flat Washer Installation General Instruction 1. The center line of the rubber roller in the infeed conveyor is aligned with the center line of the front equipment. The horizontal line is connected, or according to the site's unilateral connection method. 2. After confirming the placement positio...

  • Instruksi Pangaturan Kandel Kaca

    Glass Washing Thickness Adjustment Commissioning   Take 3mm thickness glass washing for example Before Washing,   1. Find the Zero Point (Pinch rollers and lower rolllers touch each other) 2. Check the rotation direction of brush and lower rollers     When Washing See if 3...