ZAMBIRI ZAIFE

Kuchita bwino

Chuma Chatsopano

MALANGIZO

Fuqing New Fortune Machchan Co, Ltd. ndi akatswiri opanga magalasi ozama omwe amapangidwa ndi Fujian Xinfuxing Glass Gulu  mu 2003. Kwa zaka 16, New Fortune yakhala ikuyang'ana ndi kukhazikitsa makina osambitsa magalasi, kupitiliza kukonzanso magwiridwe antchito. ndi zosowa za opanga zofunikira kwambiri, kupulumutsa mphamvu, kukhazikika, chitetezo, kutetezedwa kwachilengedwe, komanso makonda azida zochapira magalasi.

  • -
    Yakhazikitsidwa mu 2003
  • -
    Zaka 16 zokumana nazo
  • -+
    chitukuko ndi nzeru zatsopano
  • -%
    Sinthani magwiridwe antchito

Chuma Chatsopano

Zambiri

  • Makina Ochapira Otsuka Glass (Brush Version)

    Makina Ochapira Otsuka Glass (Brush Version)

    Makulidwe apadera a makulidwe Kukula kwagalasi: Max 1800 x 2000 mm Min 1000 x 500 mm Kuchepa: 1.6-3.2mm Kutalika kogwira ntchito: 1000 ± 50mm (kuchokera pansi) Kuyenderera kwagalasi: Kudyetsa mtanda / mapiko Kuzama kwakugwa: Max 250mm, Min 50mm Mtanda Kupindika: 0-50mm Kufotokozera kuthamanga: 3-10m / min Kusintha kouma: 8m / min Ntchito zazikulu Chotsani fumbi, kusindikiza kwa glove, chizindikiro cha kukakamiza, ndi zina, pheretsani kuti galasi likonzekere kulira. Zinthu zazikulu ● Mikanda iwiri ya Fenner V yofanana imagwiritsidwa ntchito popereka. ● Masensa adayikidwa ...

  • Makina Otsuka Agalasi Otsuka A Windshield

    Makina Otsuka Agalasi Otsuka A Windshield

    Njira Makulidwe A BG1800 HP Sprays: 5 Gulu Air Knife: 5 Gulu Main technicalakanenedwe Kukula kwa galasi: Max 1800 x 2000 mm Min 1000 x 500 mm Kunenepa: 1.6-3.2mm Kutalika Kogwira: 1000 ± 50mm (kuchokera pansi) Kutuluka kwagalasi: feed / Mapiko pansi Kuzama kwa bend: Max 250mm, Min 50mm Cross curvature: 0-50mm Kufotokozera kuthamanga: 3-10m / min Kusintha Kuyanika kuthamanga: 8m / min Ntchito Zazikulu Chotsani fumbi, kusindikiza kwa glove, chizindikiro cha kukakamiza, ndi zina, youma bwino kuti khalani magalasi okonzekera kulira. Zofunikira ● ...

  • Magalimoto Olimbitsa Khomo Ndi Makina Otsuka ndi Galasi Otsuka ndi Sunroof

    Magalimoto Olimbitsa Khomo Ndi Makina Otsuka ndi Galasi Otsuka ndi Sunroof

    Process Route Glass input---HP washing---Brushing(4 pairs)---DI Spray---Air drying(4 pairs)---Glass output. Main Parameters Max glass size: 1300×900 mm Min glass size: 400×300mm Working width: 1300mm Glass thickness: 1.6-6mm Glass Flow: Cross feed/Wind down Main curvature: 30mm Cross curvature: 15mm Conveying speed: 3-10m/min  Drying speed: 8m/min Main Functions Remove stains, no watermark, ready for silk printing. Main Features Conveying system is driven by V belts with press roller on the t...

  • Makina Ogwiritsa Ntchito Magalimoto Otsuka Galasi (Acid Wash)

    Makina Ogwiritsa Ntchito Magalimoto Otsuka Galasi (Acid Wash)

    GCM1300mm(Before printing) Glass input---Acid Spray---Reaction---Brushing(2pair)---Air knife separation(1 pair)---Brushing(2pair)---Air knife separation(1 pair)---Brushing(3pair)---DI water spray---Air knife(5pair)---Glass Output. Main Parameters Working width: 1300mm. Glass thickness: 2-6mm. Min glass size: 450x450mm. Glass flow: SEL. Drying Speed: 3-12m/min. Main Functions Removes mildew and other stains on glass surface, no watermarks, no water on edge, ready for silkscreen or coating. Mai...

  • Makina Otsuka Opanga Magalasi

    Makina Otsuka Opanga Magalasi

    GCM2500 Standard (Before Tempering) Glass input---Pre-spray(1 pair)---brushing(3 pair)---air knife(3 pair)---DI water spray---Glass output. Main Parameters Working width: 2500mm. Glass Thickness: 3-19mm. Min Glass: 450x450mm. Drying speed: 2-8m/min. Main Function  Remove glass powder and others, no watermark and no water on glass edge, ready for  tempering. Main Features The frame is welded by SUS304 or carbon steel with top-grade auto paint. Safety covers are equipped on both sides of the eq...

OGANIZIRA Athu

Zambiri

  • agc
  • malingaliro
  • sain
  • woyendetsa ndege
  • xyg
  • nozth
  • sg

NKHANI

Ntchito Yoyamba

  • Lathyathyathya Galasi Kusamba Makina Kuyika General Insturction

    Flat Washer Installation General Instruction 1. The center line of the rubber roller in the infeed conveyor is aligned with the center line of the front equipment. The horizontal line is connected, or according to the site's unilateral connection method. 2. After confirming the placement positio...

  • Galasi makulidwe Kusintha Malangizo

    Glass Washing Thickness Adjustment Commissioning   Take 3mm thickness glass washing for example Before Washing,   1. Find the Zero Point (Pinch rollers and lower rolllers touch each other) 2. Check the rotation direction of brush and lower rollers     When Washing See if 3...