NAGU SAABSAN

Guul

New Fortune

Hordhac

Fuqing New Fortune Machines Co., Ltd. waa shirkad soo saarta qalabka muraayadaha qotada dheer oo ay aas aasay Fujian Xinfuxing Glass Group mashiinnada dharka dhalada, iyagoo si joogto ah kor ugu qaadaya wax soo saarka wax soo saarka, iyo kulminta baahiyaha soosaarayaasha sare u qaadka, badbaadinta tamarta, xasilloonida, amniga, ilaalinta deegaanka, iyo u-habeynta qalabka dhalada.

  • -
    Waxaa la asaasay 2003
  • -
    16 sano oo waayo aragnimo ah
  • -+
    horumarka iyo hal-abuurka
  • -%
    Hagaajinta waxqabadka badeecada

New Fortune

Fortune

  • Mashiinka Dharka Muraayadaha Dhalada ah (Nooca Burushka)

    Mashiinka Dharka Muraayadaha Dhalada ah (Nooca Burushka)

    Faahfaahinta farsamo ee ugu weyn Cabbirka muraayadda: Max 1800 x 2000 mm Min 1000 x 500 mm Cufnaanta: 1.6-3.2mm Dhererka shaqada: 1000 ± 50mm (dhulka bannaanka ah) Qulqulka muraayadda: Isugeynta wareega / hoos udhaca Qoto dheer ee hoos u dhaca: Max 250mm, Min 50mm iskutallaab Xawaaraha qallajinta: 8m / min xawaaraha qallajinta: 8m / min Hawlaha ugu waaweyn Ka saar boodhka, galka gacmo gashi, sumadda cadaadiska, iwm, si fiican u qallaji si aad ugu diyaar garowdo quraaradda. Astaamaha ugu muhiimsan ● Laba suumane oo isbarbar socda Fenner V ayaa loo isticmaalaa gudbinta. ● dareemayaasha waxaa lagu rakibay ...

  • Mashiinka Dharka ee Muraayadda Dhalada Loogu talagalay

    Mashiinka Dharka ee Muraayadda Dhalada Loogu talagalay

    Hawsha Jaangooska BG1800 HP Noocyada: 5 Kooxda Hawada Cirka: 5 Kooxda Tilmaamo farsamo ee ugu weyn Qaabka muraayadda: Maxadka 1800 x 2000 mm Min 1000 x 500 mm Cufnaanta: 1.6-3.2mm Dhererka shaqada: 1000 ± 50mm (dhulka ka baxsan) socodka qulqulka: feed / Hoos hoos udhaca hoos udhaca: Max 250mm, Min 50mm Isgoyska wareega: 0-50mm Xawaare u dhigida: 3-10m / min xawaaraha qallajinta Xawaaraha qallajinta: 8m / min Waxqabadka ugu weyn Ka saar busta, daabacaadda gacanka, calaamadda cadaadiska, iwm, si buuxda ugu qallaji u diyaari galaas nadiifinta. Tilmaamaha ugu muhiimsan ● ...

  • Albaabka Gawaadhida iyo Mashiinka Maydhka Muraayadda Muraayadaha qoraxda

    Albaabka Gawaadhida iyo Mashiinka Maydhka Muraayadda Muraayadaha qoraxda

    Process Route Glass input---HP washing---Brushing(4 pairs)---DI Spray---Air drying(4 pairs)---Glass output. Main Parameters Max glass size: 1300×900 mm Min glass size: 400×300mm Working width: 1300mm Glass thickness: 1.6-6mm Glass Flow: Cross feed/Wind down Main curvature: 30mm Cross curvature: 15mm Conveying speed: 3-10m/min  Drying speed: 8m/min Main Functions Remove stains, no watermark, ready for silk printing. Main Features Conveying system is driven by V belts with press roller on the t...

  • Mashiinka Maydhista Flat Glass-ka Gawaarida (Acid Wash)

    Mashiinka Maydhista Flat Glass-ka Gawaarida (Acid Wash)

    GCM1300mm(Before printing) Glass input---Acid Spray---Reaction---Brushing(2pair)---Air knife separation(1 pair)---Brushing(2pair)---Air knife separation(1 pair)---Brushing(3pair)---DI water spray---Air knife(5pair)---Glass Output. Main Parameters Working width: 1300mm. Glass thickness: 2-6mm. Min glass size: 450x450mm. Glass flow: SEL. Drying Speed: 3-12m/min. Main Functions Removes mildew and other stains on glass surface, no watermarks, no water on edge, ready for silkscreen or coating. Mai...

  • Mashiinka Maydhista Glass

    Mashiinka Maydhista Glass

    GCM2500 Standard (Before Tempering) Glass input---Pre-spray(1 pair)---brushing(3 pair)---air knife(3 pair)---DI water spray---Glass output. Main Parameters Working width: 2500mm. Glass Thickness: 3-19mm. Min Glass: 450x450mm. Drying speed: 2-8m/min. Main Function  Remove glass powder and others, no watermark and no water on glass edge, ready for  tempering. Main Features The frame is welded by SUS304 or carbon steel with top-grade auto paint. Safety covers are equipped on both sides of the eq...

NATIIJADAADA

Fortune

  • agc
  • aqoonyahan
  • sain
  • barkin
  • xyg
  • nozth
  • sg

CUSUB

Adeegga Marka hore

  • Rakibaadda Flat Glass Maydhashada Mashiinka Guud

    Flat Washer Installation General Instruction 1. The center line of the rubber roller in the infeed conveyor is aligned with the center line of the front equipment. The horizontal line is connected, or according to the site's unilateral connection method. 2. After confirming the placement positio...

  • Tilmaamaha Toosinta Cufnaanta Cufnaanta

    Glass Washing Thickness Adjustment Commissioning   Take 3mm thickness glass washing for example Before Washing,   1. Find the Zero Point (Pinch rollers and lower rolllers touch each other) 2. Check the rotation direction of brush and lower rollers     When Washing See if 3...