NIPA RE

Awarẹ

Titun Fortune

Ifihan

Fuqing New Fortune Machines Co., Ltd jẹ amọja ẹrọ iṣelọpọ gilasi ti o jinlẹ jinlẹ eyiti o da nipasẹ Fujian Xinfuxing Gilasi Group , ni igbagbogbo igbesoke iṣẹ ṣiṣe ọja, ni igbagbogbo igbesoke iṣẹ ṣiṣe ọja, ati awọn aini awọn aṣelọpọ ipade fun ṣiṣe giga, fifipamọ agbara, iduroṣinṣin, aabo, aabo ayika, ati isọdi ti ohun elo fifọ gilasi.

  • -
    Ni ipilẹṣẹ ni ọdun 2003
  • -
    16 ọdun iriri
  • -+
    idagbasoke ati vationdàs .lẹ
  • -%
    Mu iṣẹ ṣiṣe dara si

Titun Fortune

Fortune

  • Ẹrọ fifọ gilasi (Ẹya fifun)

    Ẹrọ fifọ gilasi (Ẹya fifun)

    Awọn asọtẹlẹ imọ-ẹrọ akọkọ Iwọn gilasi: Max 1800 x 2000 mm Min 1000 x 500 mm Nipọn: 1.6-3.2mm Giga ṣiṣẹ: 1000 ± 50mm (kuro ni ilẹ) sisan gilasi: Kikọja agbeka / Yiyi isalẹ Ijinlẹ ti titẹ: Max 250mm, Min 50mm Agbelebu iṣu-iṣu: 0-50mm Iyara gbigbe: 3-10m / min adijositabulu Iyara gbigbe: 8m / min Awọn iṣẹ akọkọ Yọ eruku, titẹ sita, ami titẹ, ati bẹbẹ lọ, gbẹ ni kikun lati mura gilasi fun laminating. Awọn ẹya akọkọ ● Awọn igbanu meji ti o jọra Fenner V ni a lo fun sisọjade. Awọn sensosi ti fi sii ni ...

  • Ẹrọ fifọ Gilasi Fun Bọtini afẹfẹ

    Ẹrọ fifọ Gilasi Fun Bọtini afẹfẹ

    Ilana Ilana Ilana BG1800 HP Sprays: 5 Ọbẹ air Air: 5 Ẹgbẹ pataki awọn imọ ẹrọ akọkọ Gilasi gilasi: Max 1800 x 2000 mm Min 1000 x 500 mm Nipọn: 1.6-3.2mm Iga iṣẹ: 1000 ± 50mm (pipa ilẹ) Glass ṣiṣan: Agbekọja ifunni / Wing isalẹ Ijinlẹ ti titẹ: Max 250mm, Iṣẹju 50mm Curvature: 0-50mm Iyara gbigbe: 3-10m / min adijositabulu Iyara gbigbe: 8m / min Awọn iṣẹ akọkọ Yọ eruku, titẹ sita, ami titẹ, ati bẹbẹ lọ, gbẹ daradara si gba gilasi ṣetan fun laminating. Awọn ẹya ara ẹrọ akọkọ ● ...

  • Ẹnu ọkọ ayọkẹlẹ Ati ẹrọ fifọ gilasi Gilasi Ọrun

    Ẹnu ọkọ ayọkẹlẹ Ati ẹrọ fifọ gilasi Gilasi Ọrun

    Process Route Glass input---HP washing---Brushing(4 pairs)---DI Spray---Air drying(4 pairs)---Glass output. Main Parameters Max glass size: 1300×900 mm Min glass size: 400×300mm Working width: 1300mm Glass thickness: 1.6-6mm Glass Flow: Cross feed/Wind down Main curvature: 30mm Cross curvature: 15mm Conveying speed: 3-10m/min  Drying speed: 8m/min Main Functions Remove stains, no watermark, ready for silk printing. Main Features Conveying system is driven by V belts with press roller on the t...

  • Ẹrọ Flat Glass Gilasi fifọ (Acid Wash)

    Ẹrọ Flat Glass Gilasi fifọ (Acid Wash)

    GCM1300mm(Before printing) Glass input---Acid Spray---Reaction---Brushing(2pair)---Air knife separation(1 pair)---Brushing(2pair)---Air knife separation(1 pair)---Brushing(3pair)---DI water spray---Air knife(5pair)---Glass Output. Main Parameters Working width: 1300mm. Glass thickness: 2-6mm. Min glass size: 450x450mm. Glass flow: SEL. Drying Speed: 3-12m/min. Main Functions Removes mildew and other stains on glass surface, no watermarks, no water on edge, ready for silkscreen or coating. Mai...

  • Ẹrọ fifọ Gilasi Gilasi

    Ẹrọ fifọ Gilasi Gilasi

    GCM2500 Standard (Before Tempering) Glass input---Pre-spray(1 pair)---brushing(3 pair)---air knife(3 pair)---DI water spray---Glass output. Main Parameters Working width: 2500mm. Glass Thickness: 3-19mm. Min Glass: 450x450mm. Drying speed: 2-8m/min. Main Function  Remove glass powder and others, no watermark and no water on glass edge, ready for  tempering. Main Features The frame is welded by SUS304 or carbon steel with top-grade auto paint. Safety covers are equipped on both sides of the eq...

Awọn ẸKỌ WA

Fortune

  • agc
  • ọjọgbọn
  • sain
  • irọri
  • xyg
  • alaigbede
  • sg

Awọn iroyin

Iṣẹ akọkọ

  • Flat Glass Fifọ Ẹrọ Fifi sori Gbogbogbo Ilana

    Flat Washer Installation General Instruction 1. The center line of the rubber roller in the infeed conveyor is aligned with the center line of the front equipment. The horizontal line is connected, or according to the site's unilateral connection method. 2. After confirming the placement positio...

  • Ilana Iṣatunṣe Ọra Gilasi

    Glass Washing Thickness Adjustment Commissioning   Take 3mm thickness glass washing for example Before Washing,   1. Find the Zero Point (Pinch rollers and lower rolllers touch each other) 2. Check the rotation direction of brush and lower rollers     When Washing See if 3...